Do you need a conversion from M-Bus to other Protocols?
With the M-Bus QuickServer Gateway, FieldServer Technologies enables data access from M-Bus networks and devices to other networks that might be utilizing open and proprietary protocols such as BACnet, Modbus, LonWorks, Metasys N2 by JCI, SNMP and more. With over 100 protocols available in the extensive FieldServer Driver Library, no other product can connect M-Bus to more products!
The M-Bus QuickServer Gateway is configurable to act as both a Master and a Slave M-Bus device. As an M-Bus Master the number of devices supported is limited to up to 64 devices as the FieldServer provides power to the M-Bus. The M-Bus master interrogates the slave devices as the gateway acts as a Client. It will request information from the slave devices and rece3ive and process only the expected responses.
As an M-Bus Slave the maximum number of devices on the M-Bus is limited to the M-Bus standard of 250. The gateway will act as a Server and will respond only to requests from the M-Bus master devices.
We have module solutions which allow integration directly into M-Bus products as well as the stand alone solutions shown bottom right.
Range of Conversion Solutions
Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.
|QuickServer 1010||2x RS485||1x Ethernet|
|QuickServer 1011||1x RS485||1x Ethernet||1x Lonworks|
|QuickServer 1210||1x RS485 1xRS232||1x Ethernet|
|QuickServer 1211||1x RS485 1xRS232||1x Ethernet||1x Lonworks|
|QuickServer Fieldbus||1x RS485||1x Ethernet||M-bus or KNX|
|FS20 Series||1x RS232/485||1x Ethernet||1x Lonworks|
|FS25 Series||2x RS232/485||1x Ethernet|
|FS30 Series||2x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support:eg Profibus, DeviceNet etcHot Standby Support|
|FS40 Series||8x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etcHot Standby Support|
|SlotServer||1x RS232/485||1x Ethernet||1x Lonworks||For Rockwell ControlLogix 5600|
Lonworks and Fieldbus are options not provided on base models.