Rockwell Automation Integration
ROCKWELL DATA CONVERSION
Whether you need to connect a Rockwell PLC to a foreign device for monitoring and control purposes or whether you want to monitor and control data in a Rockwell PLC, Drive or device using a Building Automation System or some other PLC we can help you by providing gateways that connect to a large number of systems.
Convert
As a systems integrator, Chipkin can integrate many Rockwell products. Chipkin has successfully integrated and tested many of these devices and continues to add new ones.
We have module solutions that allow integration directly into Rockwell products as well as the stand-alone solutions shown bottom right.
For more information on Rockwell, click here!
Rockwell Devices
Chipkin offers multiple solutions that will allow you to integrate Rockwell devices to your BACnet Networks.
Not integrating to BACnet? No problem, we offer over 120 other protocols to integrate with. Too many to list here.
Contact Us to discuss your project needs, I am sure we can make the integration process an easy experience. Not only that, but all our solutions come with Free Modbus and BACnet Software for Testing.
Dual-Ethernet Port QuickServers
The Dual Ethernet Port QuickServer is the premium secure QuickServer for those needing the best and most secure networks. Besides being capable of handling everything that the classic QuickServer and the QuickServer can handle, it also contains 2 Ethernet ports, can convert up to 10,000 points and has a lot of new security features. It supports 1 RS-485/RS232 Port, 1 RS485 Port, and two Ethernet ports.
With two Ethernet ports, the dual-port QuickServer allows data to move seamlessly across disparate subnets allowing seamless integration with maximum security. Click here to read more about QuickServer Gateways
Classic QuickServers
The Classic QuickServer (FS-QS-1XXX) and Upgraded QuickServer (FS-QS-2XXX) are a family of high-performance, fully configurable, and cost-effective building and industrial automation protocol gateways. They are designed for integrators to easily interface devices to networks in commercial buildings, campuses, and industrial facilities.
There are six standard models that come in basic (250 points) or enhanced (500-5000 points) and can connect to serial (RS485 and RS232), Ethernet, and/or LonWorks as well as KNX and M-Bus
Chipkin provides RockWell devices for a wide number of conversions. Contact Us for a free consultation.
Range of Conversion Solutions
Depending on project requirements select from units with varying resources and multi-port devices. OEM and embedded solutions too.
| FS-QS-1xxx Series | 1x RS232 or 485 or Lonworks | 1x RS485 | 1x Ethernet | 250-5000 points |
| FS-QS-2xxx Series | 1x RS232/485 | 1x RS485 | 1x Ethernet | 250-5000 points |
| FS-QS-3xxx Series | 1x RS232/485 | 1x RS485 | 2x Ethernet | 250-10000 points |
| FS-3510 Series | 2x RS232 and 2x RS485 | 2x Ethernet | 1x Lonworks | 250-10000 points, FieldBus Support:eg Profibus, DeviceNet, Hot Standby Support |
Lonworks and Fieldbus are options not provided on base models.
Block Diagram
FS30 series shown for purposes of illustration. Capability depends on hardware, firmware and configuration.
Chipkin Automation and Rockwell
CAS has sold, configured, and installed many systems which connect Rockwell products to other systems. Recent projects include allowing monitoring and control of Cummins Diesel Generators by a Rockwell PLC, Monitoring of Mircom FX200 fire alarm panels using a PLC5 system, and monitoring a Simplex 4100 fire panel using a ControlLogix system. Call us and discuss your application.
Bello is an interesting article on Installing Fieldserver Eds Files On A Rockwell Plc:
Here is an interesting article on Simple Steps To Install Fieldserver Eds Files On A Rockwell Plc
Data Sheets, Manuals and Resources
FS-8700-03
- DF1 - MANUAL- FS-8700-03
- DF1 - Data Sheet
- FS-8704-14
- ETHERNETIP - DATA SHEET
-
FS-8704-14
- ETHERNETIP - MANUAL
-
RockWell
Opcode Summary - ROC By Chipkin
-
RockWell
Data Types Summary - ROC By Chipkin
- More Data Sheets…
Need Help
Rockwell Automation Web Site: www.rockwellautomation.com
Need more info ? Call or email us.
Metasys® as used in this document is a trademark of Johnson Controls, Inc.
FREE CAS BACNET EXPLORER WITH THE PURCHASE OF A BACNET GATEWAY!
Purchase a FieldServer or CAS Gateway from us that contains any BACnet protocol and we will help you test and document the BACnet interface by providing a free full license to the CAS BACnet Explorer and a hardcopy of the BACnet booklet.
The USB key and booklet ship with the product.
Thanks for choosing Chipkin’s protocol gateways, data clients, and integration services to meet your building and industrial automation requirements!
Chipkin™ is a building and industrial automation protocol expert. We develop, configure, install and support gateways (protocol converters), data loggers and remote monitor and controlling applications. Founded in October 2000, Chipkin provides expert solutions for converting BACnet®, Modbus®, and LonWorks®—to name just a few—and enabling interfaces for HVAC, fire, siren, intercom, lighting, transportation and fuel systems. The high-quality products we offer (including those from other vendors) interface with Simplex™, Notifier™, McQuay™, GE™ and many others—so you can rest assured that we will select the most appropriate solution for your application.
With Chipkin you are buying a solution. Our configuration expertise in this field combined with free BACnet and other tools ensure your success; and our customer support via phone, e-mail, and remote desktop tools means that we’re there when you need us. Chipkin is a small responsive company, and we live or die by the quality of our service—and with offices in two time zones—we can provide support when you need it. Give us a call now!
Customer Support
Chipkin is proud to provide support for the products we sell. For technical support, sales, and customer service, please contact us at 1 (866) 383-1657