The Intesis OPC – NID3K software is a standard OPC server that follows the Data Access 1.0 and 2.0 data protocol. This software is intended to be used in the integration of Notifier NID3000 fire panels by any SCADA or control and monitoring system provided
with an OPC client driver.
Information to extract from the fire panel is indicated as OPC Items.
Communication possibilities
with the fire panel are:
- Through direct connection with the panel (via serial port EIA232)
- Through the ID2NET network (using the ISO-RS232 adaptor provided by Notifier).
I'd like to inquire about the Notifier ID(3000, 3002, 50, 60) Fire Panels into OPC client (discontinued) IS-OPC-NID3K-xC (x=1, 2, 5, 16, 32, 64 Devices).
Please provide me with a quote for this product.
Specifications
Intesis OPC Server is a software package for WindowsTM operating systems.
OPC features
- OPC Data Access 1.0a and 2.0. Notifier features
Control and status of the panels.
- Capacity (depending on reference):
- Nets: Up to 16
- Centrals: Up to 64 in each net. If the central are Standalone the OPC server can only integrate 16 of them.
- 1 to 8 loops (depends on the panel).
- Detectors: 1 to 99 per loop (depends on the panel).
- Modules: 1 to 99 per loop (depends on the panel).
- 1 to 255 zones (depends on the panel).
- An indication of a communication error with the panel.
- Supports the following protocols:
- Full/duplex (panel's main board)
- Half/duplex (opto-isolated ISO RS232 board, recommended).
- Simple configuration: COM, baud rate, etc.
- A free RS232 port in the PC is needed to connect to the panel.