The CLCGSM8 Group Switch Module will connect up to eight inputs to the Modular Lighting
Control System. Through the color-coded spring clip terminals, the device supports switches,
photocells and motion sensors. When not used for switches, the pilot light terminals may be
configured to provide power to the connected sensors simplifying installation.
Pushbutton programming provides a simple means of assigning the input to groups
of relays and other group inputs on the lighting network. Module doubles as a
power injector distributing power to the panel's relay modules and the lighting
network, providing status indication for network power monitoring.
Features:
- Controls up to 6 relays with or without feedback
- Inputs can be configured for switches, photocells or motion sensors
- Color-coded spring-type terminals for switch wiring
- Pushbutton programming capable for basic operation
- Toggle switch state via pushbutton
- Jumper selectable for binary contacts or analog photocell
- Communicating on CAN lighting network
I'd like to inquire about the CLCGSM8 - 8 Group Input Module for the GE LightSweep System CLCGSM8.
Please provide me with a quote for this product.
Specifications
- Inputs/Outputs: 8 4-position connectors for closedcontact switch/motion/photocell inputs including pilot/locator light outputs
- Technology: 32-bit ARM Processor with internal A/D, Flash and RAM
- Communications Port: CAN Network @40k bps
- Device Address: Set via rotary dials, Address range: 1 to 99
- Connectors: Power In: 5-pin MTA Inputs: spring-clip terminal connectors Network/Power: (2) 4-pin MTA, (2) RJ45
- Wiring Class : Class 2
- Power: 24 VAC 14.5 VA
- Ambient: 32° to 131°F (0° to 55°C), with enclosure 10-90% RH (non-condensing)
- Dimensions: 5 1/2 x 4 3/4 x 1 1/8 in. (14 x 12.1 x2.9 cm) with housing 0.34 lb. (155g) with housing
- Compliance: CE, FCC
- Approvals/Standards: cUL Listed - Energy Management