CAS Gateway Software Tools
What is the CAS Gateway Firmware download tool?
The CAS Gateway Firmware download tool is a developer software tool that allows you to upgrade the firmware on CAS Gateways. The tool is simply designed and easy to use.
Usage Instructions: Please complete the following steps to upgrade the firmware on a CAS gateway Device.
- Ensure that the CAS Gateway Ethernet port ‘link’ light illuminates, showing a connection to the network
- Select the device from the list of discovered devices on your network and click ‘OK’
- The firmware file should end “_APP.s19”³
- The firmware file should be at least 2mb in file size, probably closer to 3-5mb
- The firmware file should come from CAS. Do not upload any other firmware files with this tool unless explicitly told to by Chipkin automation systems support
Note: The auto-update tool uses port UDP 20034. If you have any problems please feel free to contact Chipkin Automation Support for assistance
- The application must be installed on a computer running a Windows operating system.
- The computer that the application is installed on must be on the same subnet as the CAS Gateway. To change the SUBnet of the IP Gateway, Please download the CAS Gateway IP Address Tool FREE!!
What is the CAS Gateway IP Address Tool?
The CAS Gateway IP Address Tool is a developer software tool that allows you to change the IP address on CAS Gateways. The tool simply designed and easy to use. It can be Downloaded here.
To use, simply click the “Download” link, unzip the file, and double-click the executable file.
The IP of the CAS Gateway will differ depending on how you have connected to your computer and the Gateway to the Network.
The CAS Gateway is connected to a router
If the CAS Gateway is connected to a router, and the CAS Gateway was set to DHCP, then the router will assign an IP address to the CAS Gateway. This IP address will appear in the “Select-a-Unit” frame of the IPSetup Tool, shown below. Use this IP in a browser to test if the connection is good.
The CAS Gateway is connected to a switch or hub
If the CAS Gateway is connected to a switch or hub with the computer and there is no router as part of the network, then the IP address will appear as DHCP’d at 0.0.0.0, see image below.
To access the CAS Gateway you will need to set a Static IP Address using the IPSetup Tool. Set the IP to something similar to the computer’s IP (for example, if the computer is set to 192.168.1.69, then set the CAS Gateway’s IP to 192.168.1.70 or .71).
Make sure that the Network Mask on the CAS Gateway is the same as the Subnet Mask of the computer. Press the “Set->” button to assign a static IP. The Gateway will restart. After the restart, use that IP in a browser to test the connection.
Note: To find out the mask of the computer, simply open a cmd window and type ipconfig
Note: In the IPSetup Tool, to set the Gateway back to DHCP, set all the values, except the Baud Rate to 0.0.0.0
The CAS Gateway is connected directly to the Computer
If the CAS Gateway is connected directly to the computer via an Ethernet cable, then follow the same steps as if the CAS Gateway was connected via a hub or switch.
However, when setting the IP Address, if the computer contains a Default Gateway, then the Gateway option must match it.
After setting the IP, the CAS Gateway will restart. After the restart, test the IP in a browser to test the connection.
Note: To test the IP in a browser, open a web browser (Google Chrome, IE, Firefox) and in the address bar type in: http://ip. Replace the “ip” with the actual IP Address of the CAS Gateway. If you see a manual or reports screen, then the connection is good.