Chipkin's Modbus TCP and MQTT Software Gateway is a Windows-based protocol converter. The gateway operates by reading the data from devices that use Modbus TCP The values read from these devices then can be read from a network that uses MQTT. Also, works vice-versa.
The gateway requires minimal configuration and can be considered a "plug and play" component of any network system. It's ready to operate out of the box and can be installed without an engineer's approval.
CAS2500 - Windows
This device is a Software version of our Data Client/Logger and Gateway. It is compatible with an hardware that can load Windows 7 or 10. It allows you to turn any PC that meets the minimum requirements into a Data Client/Logger and Gateway.
Web (HTTP, XML, REST, Json, MQTT) Driver
The Web Diver allows for data to be monitored by remote systems running applications that can issue HTTP or SOAP/XML GET requests – such applications can be easily developed by end users. Of course, this data is available using an Internet Browser such as Internet Explorer or Google Chrome
Modbus TCP Driver
The CAS Modbus TCP driver allows the CAS Gateway to transfer data to and from devices over Ethernet TCP/IP using the Modbus protocol. The CAS Gateway can either be a Client, reading and controlling values from a slave, or a Server, serving data to a Modbus Master.
The CAS Modbus TCP Driver supports the following Modbus Functions:
|- 01 (0x01) Read Coils||- 05 (0x05) Write Single Coil|
|- 02 (0x02) Read Discrete Inputs||- 06 (0x06) Write Single Register|
|- 03 (0x03) Read Holding Registers||- 15 (0x0F) Write Multiple Coils|
|- 04 (0x04) Read Input Registers||- 16 (0x10) Write Multiple Registers|
CAS2500 - Windows
- Operating systems: Windows 7, Windows 10
- >= 10 mb disk space
- >= 512 mb ram
- Ethernet network adapter
If RS232 or RS485 serial connection is needed, an adapter will be required. Chipkin Automation systems suggest ACON U-01.