KNX to LonWorks Gateway

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of a KNX system from a LonWorks installation.
SKU:
IBOX-LON-KNX-XX (200, 500, 4000 points)
02-16-51-44_2018_02_02_12_04_55_Products.png - /2018/feb/02-16-51-44_2018_02_02_12_04_55_Products.png

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of LonWorks devices from a KNX installation.

The IntesisBox LON-KNX is a device meant to enable interworking between KNX (TP-1) and LON (TP/FT-10) control networks.

This ending is achieved by effectively implementing both a Network Variables’ (NVs) interface on the LON side and a Communication Objects’ interface on the KNX side. Data points on either side (NVs at LON or Communication Objects at KNX) are internally bound within the IntesisBox LON-KNX, allowing the information to be moved from KNX to LON and vice-versa.

Thus, IntesisBox LON-KNX will be seen as a regular LON device on the LON TP/FT-10 network and a regular KNX device at the KNX TP-1 network.

The set of Communication Objects on the KNX interface, the set of NVs at the LON interface and the bindings between them are defined in the IntesisBox LON-KNX at configuration time.

I'd like to inquire about the KNX to LonWorks Gateway IBOX-LON-KNX-XX (200, 500, 4000 points). Please provide me with a quote for this product.

Specifications


Block Diagrams

/2018/feb/02-16-52-36_KNX to Lonworks Gateway Block Diagram.png/2018/feb/02-16-52-56_KNX to Lonworks Gateway Block Diagram B.png

Contact Us

Contact us via phone (+1 866-383-1657) or leave a detailed message below for sales, support, or any other needs

*Required Field
I'd like to receive the newsletter. *Check email for confirmation.
*Required Field
Preferred Time To Be Contacted (PST)
8:00am - 12:00pm 12:00pm - 5:00pm