August 2019 - Chipkin Quarterly Newsletter
August 2019 Newsletter: BACnet Objects, Lost Revenue due to a Blocked Toilet, Car Safety, and more!
August 2019 Newsletter: BACnet Objects, Lost Revenue due to a Blocked Toilet, Car Safety, and more!
We are giving away a single-port BACnet Router during the month of August, 2019. Chipkin Automation Systems Inc. will randomly select one lucky winner to receive the grand prize after all entries are tallied after September 3rd.
The current Modbus spec does not support a situation where you have to connect two clients to the same slave. The solution would be to use one our multi-port FieldServers with an appropriate configuration.
The Caterpillar M5X driver allows the FieldServer to transfer data to and from devices over RS-232 using Caterpillar M5X protocol. The FieldServer emulates either a Server/Client. The driver is capable of comm. with any device that uses Caterpillar M5X.
If the FieldServer is to be connected to the Serial Printer Port of the AM6000 Panel, use the Driver “FS-8700-52 Notifier Italia AM6000”³.
1. GE-TLC Driver Description: This serial driver allows connectivity to a GE-TLC network by providing data transfer to the RLINK device. The RLINK device is provided by GE Lighting Controls as a gateway between its proprietary network and building automation networks.
FieldServer’s are highly configurable devices and can be configured to be both DNP3 masters and slaves. In fact a single FieldServer can be configured to act as both master on one or more ports and as a slave on other ports.Any data read using any of FieldServer’s over 110 protocols can be served as DNP3 data and Classes can be..
Learn how to Configure a FieldServer for Hot Standby Mode 1
Configure a QuickServer or FS-B35XX FieldServer for Hot Standby Mode 1, sample setup guide.
Modbus RTU is the most common implementation available for Modbus. Modbus RTU is simply Modbus over serial communication media like RS485, RS422
This article provides a text-based and visual set of instructions to Download the configuration file and firmware to a FieldServer using the RUInet utility.
FieldServer - What is FieldServer
RS485 - How do I connect the FieldServer FS20 series to an ICD102A optical isolator using a 2-wire RS 485 connection
This is a tutorial on how to use Xpath Expressions to find data in XML files. Then, we can take that data and store it onto a FieldServer, which allows us to serve that data over Modbus TCP & BACnet IP.
Achieve Hot Standby mode with FieldServer, ensuring continuous operation with redundant systems. Ideal for critical processes, it enhances reliability and prevents downtime.
The Modbus RTU driver allows the FieldServer to transfer data to and from devices over either RS-232 or RS-485 using Modbus RTU protocol. The FieldServer is capable of being used as a port expander..Formal Driver Type..Compatibility Matrix..Connection Information..
The LonWorks driver allows the FieldServer to transfer data to and from devices using LonWorks protocol. The FS-B30 Series and FS-B4011 can handle a maximum of 4096 explicitly addressed nodes and is capable of being configured by LonMaker..
The driver is capable of acting as a master or slave. As a master, the Fieldserver polls to read or write the McQuay device
FieldServer's Modbus TCP driver enables Ethernet data transfer using Modbus/TCP protocol with up to 200 simultaneous connections.
The GE-SRTP driver allows the FieldServer to transfer data to and from devices over Ethernet using GE-SRTP Driver protocol. Almost all GE automation equipment supports the GE-SRTP protocol when equipped with an Ethernet Port..The FieldServer can emulate either a Server or Client.. The driver, acting as a Client..
The FS-B2510 FieldServer Gateway provides two serial ports and one Ethernet port making it ideal for interfacing either two serial devices or a serial to Ethernet connection.
The FS-B4010 Series includes eight RS-232 ports, two RS-485 ports, two Ethernet (10BaseT) ports to interface to the devices. In addition there is an ISA card slot for special driver adapter cards such as LONWORKS®, DH+, Profibus, ControlNet, etc.
Need to take a diagnostic for a QuickServer/FieldServer issue? After you have done so, please contact the Chipkin support team if it pertains to a project we've worked on (or are working on).
Explore LonWorks technology comprehensively, from network variable types to FieldServer configuration essentials.
Modbus TCP, an open protocol in building automation, can be managed and converted with FieldServer clients.
This example FieldServer configuration illustrates a config which reads data from a Modbus/TCP device and makes the data available as BACnet data. A remote BACnet client can read and write points.
Everything you need to know in 5 simple sentences a quick overview in simple sentences and diagrams
Need custom functionality for your FieldServer / QuickServer Gateway? Chipkin is authorized to perform custom development for FieldServer and QuickServer products. Most often this is to develop a new driver.
Nohmi Integlex - How to configure a FieldServer as an Integlex Passive Client
FieldServer offers a 10-serial, 2-Ethernet port, 1 DH+ port protocol translator gateway that enables data transfer between serial, Ethernet and Allen Bradley DH+ protocols.
Integrate FieldServer EDS files with Rockwell PLC for efficient data exchange. Download EDS zip files now. Easy installation steps provided.
What Simplex report can be used as a points list for configuration ?
In the case of fire panels, gateways are commonly connected to the printer port of the fire panel. The gateway must accept the messages sent by the fire panel. In such a case, the fire panel is called an active server.